Examine Limit Switch Lights
Overview/Background Information
What Steps Have I Already Taken?
Troubleshooting Steps
- From the PathPilot® interface, click the Status tab.
-
Locate the X Limit, Y Limit, and Z Limit lights.
Is the X Limit, Y Limit, or Z Limit light on?
- Yes, the X Limit light is on: Go to Put a Jumper Wire Between Wires J2-1 and J2-4.
- Yes, the Y Limit light is on: Go to Put a Jumper Wire Between Wires J2-2 and J2-4.
- Yes, the Z Limit light is on: Go to Put a Jumper Wire Between Wires J2-3 and J2-4.